- HomePro Single Wall Switch - ZRW230The HomePro single wall switch is switching attached loads and is controlled either by the local switching paddle or remotely via the Z-Wave wireless protocol. It is included and controlled in a Z-Wave network by a remote control, a wireless control centre or any other kind of Z-Wave controller including a PC-software.Beside the local switch the unit can control other Z-Wave units remotely in up to three additional Z-Wave groups, which are associated with this device. Tipping one time, two times or three times the switching paddle performs the control. The locally attached load is controlled together with the Z-Wave units associated in group 1. The association of further Z-Wave devices needs to be done by a Z-Wave controller. The unit is powered by 230V power and needs a pattress box with 230 V power wires for installation. The unit is shipped completely with electronics, switching paddle and mounting frame in arctic white HomePro style. The mounting frame can be replaced by another mounting frame of the HomePro switching series. The unit is designed for use within a 3-wire system, which means that a neutral wire (blue) is needed for operations.Technical Data:* Power rating: 230V, 50 Hz* Wiring: 3-wire system* Maximum loads: all loads up to 6 A* Wireless behaviour: receiver and transmitter if further units are associated* Z-Wave type: slave* Distance: up to 30 m in buildings* Display: blue LED shows switching status* Local interaction: one button for switching, inclusion, exclusion and association* Installation: pattress box* Power supply: via 230 V power

-Duwi Z-Wave Dimmer InsertThis pattress box insert of the manufacturer Duwi is intended to control lamps, both with resistive or inductive load. A pattress box is needed for installation. The insert has two buttons. In order to use them for local control the insert needs to be completed with a switching paddle and a mounting frame of one of the Duwis switching series “Everlux” or “Arcada”. The unit is designed for use within a 2-wire system, which means that no neutral wire (blue) is needed for operations. It will be included and controlled in a Z-Wave network from a remote control, a wireless control centre or any other kind of Z-Wave controller including a PC-software.The device is a conventional leading-edge phase control dimmer with support for inductive loads such as transformers. Additionally conventional resistive loads such as incandescent lamps or 230 V halogen lamps can be dimmed as well.Technical Data:* Power rating: 230V, 50 Hz* Wiring: 2-wire-system* Maximum loads:o Incandescent lamps: 40...300Wo 230V (HV) halogen: 40 ... 300Wo Low voltage halogen with standard transformer (inductive load): 30...300VAo Low voltage halogen with switched power supply (reactive load): noo Fluorescent light: 30… 300VA, only dimmable lamps* Wireless behaviour: receiver* Z-Wave type: slave* Installation: in pattress box* Distance: up to 30 m in buildings* Display: Multicolour-LED* Interaction: two buttons to be completed with switching paddle for local operation* Power supply: via 230 V power* Dimensions: 48mmx48mmx23mm

-QEES Circuit Breaker and Power MeterThe 16A circuit breaker with build-in electricity meter is a combined on / off_switch and sub meter. The on / off switch allows you to disconnect devices that otherwise would consume power when not needed. This can be very useful if you wish to save energy as well as the environment. The Switch can be controlled either locally or using a Z-Wave controller. The build in electricity meter measures the power consumed by the attached load in watt. It also keeps track of the accumulated usage in Kwh.The information can be retrieved using the Z-Wave protocol and can be used to build graphs, compare usage, etc. This functionality helps you get a clear picture of which devices uses power and how much. The detailed usage information gives you the information needed to start saving energy effcient, without having to give up the comfort thus the switch can be turned on using a remote control.Technial Data* Size (mm) 123x98x26(HxWxD)* Color White* Supply 110V-240V 50/60Hz* Range 100 Ft.* Z-Wave type: Routing slave* Max. Load 16A / 4000VA** Sub meter. Yes* Self Power consumption: < 1Watt