S.C. TECHNOMILL va ofera Cantar rotativ, Cantar tubular vertical, Sistem de dozare automat si programabil adaos de apa, umidificarea graului, Sistem de masurare online a umiditatii, Sistem de urmarire de proces, Urmarirea calorimetrica a fainurilor1. Cantar rotativEvaluation:Pulse time spacing of both inductive sensors is detected accurately by the separate evaluating electronic system. The momentary throughput in (kg/h) is then calculated from these times, indicated and compared with two adjustable limit values. An electronic integration device then uses the output signal to calculate the total weight fed through the rotor balance system and display the result on a resetable summation device. In addition, kg pulses are available for the remote counters and yield calculatorsare available for the remote counters and yield calculators.The evaluation electronic system can be installed at any distance from the balance. The system can be supplied in a wall-mounted cabinet or suitable for control panel installation. A pre-selection counter for setting the required throughput as well as a 0 (4) - 20 A analogue output of the momentary throughput can be supplied as an option for control and registration. Technical specifications:

• Mains voltage: 400 V, 50/60 Hz, 10 A
• Mains voltage: 400 V, 50/60 Hz, 10 A
• Rotor RPM: RC1/2 600 RPM, RC3 450 RPM
• Output range RC 1: 0,5 – 20 m³/h, max.: 4 t/h
• Output range RC 2: 0,5 – 20 m³/h, max.: 10 t/h
• Output range RC 3: 1,0 – 35 m³/h, max.: 18 t/h
• Accuracy: +/- 0,5 % of the measuring range
• Reproducibility: +/- 0,2 %
• Dimensions - weigher: Pipe diameter: RC 1/2 = 150 mm, RC 3 = 200 mm
• Weigher height: RC 1/2 = 800 mm, RC 3 = 950 mm
• Weigher diameter: RC 1/2 = 500 mm, RC 3 = 600 mm
• Colour: RAL 7032
• Type of Protection: ATEX Zone 22
• Controls: Panel mounting: 96 x 48 x 150 mm ( W x H x D )
• Wall-Box: 200 x 300 x 180 mm ( W x H x D )
• Type of protection: IP 54

A rotor is located in the rotor weigher which is driven by a constant speed three - phase induction motor. The product to be weighed is fed to the centre of the rotor and then accelerated to a peripheral speed of approximately 10 m/s. As the product flows through the rotor the coriolis force, or compound centrifugal force, is created as a reaction force. This coriolis force is absorbed through a spring element below the rotor and detected by means of two magnetic flux induction sensors. The coriolis force is completely proportional to the mass flow. Material-specific characteristics such as, f.i., different moisture levels, flow characteristics or friction are not included in the measurement as errors. 

• Sealed dust-tight and maintenance-free system
• Low installation height, simple assembly/installation
• Largely insensitive to vibrations
• Direct mass flow measurement
• Patented, proven measuring system
• Operation in conformity with the ATEX - guideline